Clean and safe drinking water is important for everyone. If you use a Whirlpool refrigerator with a water dispenser or ice maker, it usually works with EveryDrop Filter 1 (EDR1RXD1). This filter helps clean the water before you drink it.
Over time, the filter collects dirt and impurities. When this happens, the water taste can change, the flow can become slow, and the filter may stop working properly. That is why replacing Whirlpool Filter 1 on time is very important.
In this simple guide, you will learn:
● What EveryDrop Filter 1 (EDR1RXD1) is
● When you should replace it
● How to replace EDR1RXD1 step by step
● How to reset the filter light
Common problems and easy solutions
What Is EveryDrop Filter 1 (EDR1RXD1)?
EveryDrop Filter 1, also called EDR1RXD1, is a refrigerator water filter used in Whirlpool and similar brands. It cleans tap water before it reaches your glass or ice tray.
What Does EDR1RXD1 Filter Remove?
This filter helps reduce:
● Chlorine taste and smell
● Lead
● Mercury
● Some pesticides
● Other common impurities
Because of this, EveryDrop Filter 1 helps improve both the taste and safety of your drinking water.
Which Refrigerators Use Whirlpool Filter 1?
EDR1RXD1 is commonly used in refrigerators from:
● Whirlpool
● Maytag
● KitchenAid
● JennAir
● Amana
👉 Always check your refrigerator model or old filter before buying a new one.
When Should You Replace EveryDrop Filter 1?
Most manufacturers recommend replacing EveryDrop Filter 1 every 6 months, even if the water looks clear.
Signs You Need a New Filter:
● Water tastes bad or smells unusual
● Ice cubes look cloudy
● Water flow becomes slow
● Filter indicator light turns red
● The filter has been used for more than 6 months
Changing the filter on time keeps your refrigerator working properly and protects your health.
Things You Need Before Replacing EDR1RXD1
Before you start, make sure you have:
● A new EveryDrop Filter 1 (EDR1RXD1)
● A clean towel or cloth
⏱ The whole process usually takes less than 5 minutes.
How to Replace EveryDrop Filter 1 EDR1RXD1 (Step-by-Step)
This section is the most important part of the guide. Follow each step carefully.
Step 1: Locate the Filter
Most Whirlpool refrigerators have the filter located:
● Inside the refrigerator (top-right corner), or
● At the bottom grille
Step 2: Remove the Old Filter
● Turn the old filter counter-clockwise
● Gently pull it out
Some water may drip — this is normal
Step 3: Prepare the New Filter
● Remove all protective packaging
Check O-rings for damage
Step 4: Insert the New EDR1RXD1 Filter
● Insert the new filter into the slot
Turn it clockwise until it locks securely
Do not over-tighten.
Step 5: Flush the Filter
● Run 3–4 gallons of water through the dispenser
This removes air and carbon dust
Your water may appear cloudy at first — this is completely normal.
How to Reset the Filter Indicator Light
After replacing the filter, reset the filter light.
Common Reset Methods:
● Press and hold “Filter Reset” for 3 seconds
● Press “Light + Lock” together for 3 seconds
● Use Options → Filter Reset
Check your refrigerator manual if needed.
Common Problems & Easy Fixes
Water Leaking
● Make sure the filter is locked properly
● Remove and reinstall the filter
Filter Does Not Fit
● Confirm the model is EDR1RXD1
● Do not force it
Low Water Pressure
● Flush more water
● Replace old or blocked filters
Original vs Compatible Filters (General Information)
Original EveryDrop Filter 1
Pros
● Certified quality
● Perfect fit
● Trusted brand
Cons
● Higher price
Compatible Filters
Pros
● Lower cost
● Widely available
Cons
● Quality may vary
● Not all are certified
Always buy from a trusted seller to avoid problems.
Where to Buy EveryDrop Filter 1 Safely
Many people prefer buying filters online for convenience.
Websites like DealFilters provide a wide range of refrigerator water filters, including EveryDrop Filter 1 EDR1RXD1, with detailed product information and easy ordering.
👉 You can check the product here:
🔗 https://dealfilters.com/products/everydrop-edr1rxd1-filter-1
How Long Does EveryDrop Filter 1 Last?
● Average lifespan: 6 months
● Or about 200 gallons of water
Actual life depends on water quality and daily use.
Frequently Asked Questions (FAQs)
Is Filter 1 the same as EDR1RXD1?
Yes. Filter 1 is the name, and EDR1RXD1 is the model number.
Can I use a compatible filter?
Yes, but always choose a reliable and certified option.
What happens if I don’t replace the filter?
Water quality may drop, taste may change, and the fridge system may be affected.
Conclusion
Replacing EveryDrop Filter 1 EDR1RXD1 is a simple task that helps keep your drinking water clean and safe. By following this step-by-step guide, you can easily replace the filter, reset the indicator light, and avoid common issues.
👉 Tip: Replace your filter every 6 months and buy from trusted stores like DealFilters for a smooth experience.
🔗 Check EveryDrop Filter 1 here:
https://dealfilters.com/products/everydrop-edr1rxd1-filter-1
